14mm Leather Watch Bands & Straps

14mm watch straps, tapered to a 12mm buckle. Horween leather and alligator, made to order, with every cut and buckle listed.

Nine leathers, three lengths or a custom one. A 14mm case is a small one, so the shorter lengths and thinner unlined builds do most of the work here.

14mm Leather Watch Bands & Straps

One cut at 14mm

There's one way to cut a 14mm strap: 14/12mm, narrowing to a 12mm buckle. At that end the Pre-V and matte stainless frames aren't stocked, so it's the Classic or Field frame, in black, gold, rose gold or stainless steel.

Fitting a small case

Measure the gap between your lugs, not the case: two watches the same diameter can take 14mm or 18mm depending on how the lugs are drawn. If a shop tells you to round up to 16mm, it won't go in. Construction matters here too - unlined finishes at 1.6 to 2.0mm against 2.0 to 2.4mm lined, which on a small case is the difference between sitting under the watch and standing away from it.

Measured closer to 15mm? See our 15mm straps before you round down.

Length and leather

A 14mm strap usually goes on a smaller wrist, so Short gets ordered here most. Three lengths, Short (105/65mm) to Long (125/85mm), or a custom one, and the sizing guide helps you pick. Every leather we make is cut to any width: shell cordovan, the Classic and Vintage series, lined or unlined.